ViaLite Logo

 
t: +44 (0)1793 784389
e: sales@ppm.co.uk

 
Search:
     

Home > Fibre optic links > GPS Bands > Overview

     
 

GPS Band Fibre Optic Link

Many types of operating systems and networks need to maintain accurate synchronisation.  The ViaLite GPS Link provides a low cost method that enables GPS signal distribution over long distance to inaccessible locations.  The bandwidth of GPS link allows transmission of L1 and L2 GPS bands.  The ViaLite GPS fibre optic link has been designed with a very low noise figure specifically for GPS signals which are often very low intensity at the GPS antenna.  The wide dynamic range of the link results in negligible degradation of satellite signals due to noise or interfering signals.  The GPS link is ideal for providing a GPS derived timing signal reference to equipment positioned where no GPS signal is available, for example in tunnels or underground mines.

A typical installation with the ViaLite fibre optic link acting as a very low loss extension between the GPS antenna and receiver is shown on the left.

 

 

 

 

Metro-GPS Fibre Optic Link

The ViaLite Metro-GPS product offers a cost effective and simple method for transporting GPS RF signals to locations remote from the GPS antenna.  Metro-GPS is offered in single, dual or three channel format with further options of automatic signal switch over for situations where redundancy is required for maximum signal uptime and integrity.

Metro-GPS comes ready for in-line installation between GPS active antenna and time/frequency receiver.  The environmentally sealed head end unit is located close to the antenna and transmits the GPS signal optically over single mode fiber optic cable.  The base transceiver station (BTS) recovers the original GPS RF data for output to a standard GPS or time/frequency receiver.  Both ends of the system can be specified in AC mains or –48Vdc for a truly plug-and-play installation.


Cellular BTS sites and public mobile radio networks are examples where synchronised timing control is critical.  Metro-GPS is used in any application that demands accurate timing, location or mapping information such as:

  • Communication network synchronisation
  • Cellular BTS timing in tunnels
  • GPS re-radiation underground/buildings
  • Government secure networks
  • Military GPS synchronisation & mapping
  • Meteorological stations
     

The link below is to an article that describes an new application of GPS repeater technology that uses ViaLite technology.

http://www.esa.int/esaNA/SEMT9CRZ5BG_index_0.html

 

telephone +44 (0)1793 784389, email: sales@ppm.co.uk or complete our web enquiry form for further information.

Key Features

  • Ultra-wide dynamic range
  • L1 and L2 GPS frequencies
  • Transmits all common GPS / GALILEO / GLONASS bands
  • Wide range of gain options
  • External LNA or antenna voltage feed
  • Operation to >10km
  • Compact plug-in module for 19" or standalone use
  • OEM version

Key Benefits

  • Low loss enables long path length
  • Minimal carrier to noise degradation
  • Frequency response independent of path length
  • Low cost compared with coaxial cable
  • Non-conductive and immunity to electrical interference
Home Products Support Features About ViaLite
Satellite L Band Application notes Dual redundancy ViaLiteHD
Markets Satellite IF Case studies Monitor and control RF over fibre technology
Satcom UHF/VHF User manuals WDM/CWDM multiplexing Corporate
Broadcast DVB-T Software RF + digital Privacy policy
Timing and synchronisation Wideband FAQs Digital data Exhibitions
Military and defence Timing/reference Datasheets Careers
Mines and tunnels GPS Service Locations Electro-optical conversion
Government and public safety Antennas
Custom products Racks and enclosures News Distributors Contact Us