ViaLite‘s RF over fiber Blue2 Link is a dual-solution OEM which can be setup as 2x transmitters, 2x receivers or a transceiver, as required. The link is available in all ViaLite frequency bands from 2 kHz-4.2 GHz, including ViaLite‘s extended L-Band HTS.
The Blue2 was developed further to customer demand and can be used as a replacement for the discontinued AnaCom Transceiver or as a plugin replacement for the Optical Zonu Transceiver.
- Dual Tx, Rx or Transceiver
- External PSU
- 50 or 75 ohm
- Available with 15-Way or 9-Way D Type connector
- FC/APC or SC/APC options
- Optional WDM for single fiber connection
- I²C programmable using the developer kit
- All ViaLiteHD RF bands available
- 5-year warranty
The new Blue2 Link s a small dustproof module available in all ViaLiteHD RF bands. It can be either a dual transmitter, dual receiver or a transceiver.
The link is available with two optical inputs/outputs or single optical input/output if the integral WDM module option is selected.
The 15 way D-type connector is used for serial data transmission (RS232, RS485 & TTL), Tx or Rx Alarms, I²C set up using the ViaLiteHD Programming Kit (HRxHD-DEV103) and for connecting an external power supply (optional HPS-CS-4).
The Blue2’s compact design means it can be used in existing customer equipment or easily fitted in smaller spaces, such as ship radomes/below-deck control rooms where space can be restricted. In addition to maritime, the Blue2 Link is suitable for use in the Broadcast, GPS or regular Satcom markets.
L-Band HTS (700-2450 MHz) Transceiver with 50 ohm SMA and SC/APC connectors
GPS Dual Transmitter, 50 ohm SMA, internal antenna PSU and SC/APC connectors
L-Band HTS (700-2450 MHz) Dual Transmitter with WDM, 75 ohm F-type and SC/APC connectors
L-Band HTS (700-2450 MHz) Dual Receiver with 75 ohm F-type and SC/APC connectors
RF Performance Characteristics
|Dimensions||128 x 80 x 36 mm|
|Operating temperature||-10°C to +50°C|
|Power consumption||Transceiver – 3.2W|
Dual Transmitter – 3.8W
Dual Receiver – 2.6W
|DC Input voltage||11 to 13V, 12V Nominal|
|Connector||15way male D with screw-lock termination on back plane|
(Power, Serial Data, Alarms & I2C programming)
|Power supply compatiibility||HPS-CS-4|
|RF module types||2 x Transmitter, 2 x Receiver or 1 x Transmitter & 1 x Receiver|
IF (B), DVB-T (D), GPS (G), HTS L-Band (L), General purpose (N&M), Wideband
(S), Low Frequency Timing Link (T), Ultra-wideband (U&W)