Local Integrated GPS Splitter

The new ViaLiteHD GPS Splitter is designed to minimize rack space. The chassis is available with 1-4 RF over fiber receivers with 8-32 outputs, depending on configuration, and only uses 1RU of rack space.

All 8-32 channels can be lossless when coupled with correct RX gain on the ViaLiteHD GPS RF over fiber receiver.

  • 1U optical GPS chassis
  • Point to multipoint
  • 1×8, 2×8, 4×8, 1×16 2×16 GPS splitter
  • Up to 4 GPS receivers
  • Built-in SNMP Card
  • Splitting with GPS RX gain
  • Range of RX modules
  • 5-year warranty

 

Product Inquiry
Local Integrated GPS Splitter

The GPS Splitter is suitable for a number of applications, including:

  • Data Center timing
  • Banking institution timing
  • Scientific timing distribution
  • Cellular test environments
  • University timing distribution
  • Fixed Satcom earth stations and teleport use case
  • Oil and gas platforms
  • Big data.
 Integrated GPS splitter
Part NumberHRK-12-082-G8-S8
Frequency range1000 -1800 MHz
Gain+10 dB when Rx card fitted
Gain adjustment range15.5 dB from Rx card
Number of card slots2
Number of optical inputs1-4 (1x single Rx card to 2 x Dual Rx card fitted)
Return loss<-20 dB typical
Isolation port to port<-23 dB typical
Phase balance<0.5 dB typical
Power consumption<12 (fully configured)
SNMP InterfaceRJ45
Input power90-265 VAC
Operating temperature range-10 °C to +50 °C
Storage temperature range-40 °C to +80 °C
Humidity95% non-condensing humidity

All tests @ 25°C after 15 minutes warm up

Performance specifications based on a 50 Ohm termination on all ports

 

 

Integrated GPS Splitter Datasheet  (version HRK-12-xxx-DS-2)
Integrated GPS Splitter User Manual (version HRK-1C-X)

Share: Email this page: Print: Subscribe for news: