Ultra Wideband 2 kHz-4.2 GHz
ViaLite‘s Ultra Wideband link provides 2 kHz-4.2 GHz bandwidth, which is ideal for C-Band downlink and S-Band for Telemetry, Tracking and Command (TT&C). The link is used to connect antennas to control rooms, network operation centers and broadcast headends.
- 50 Ohm
- Wide RF range covers IF bands 70-140 MHz, L-Band HTS, S-Band and C-Band Downlink to reduce spare holding
- Ultra-wide dynamic range
- Protocol transparent – transmits all video, data and audio modulation formats
- Transmission distances of 1 m to 50 km
- Interfaces with monitor and control (M&C) systems for remote monitoring
- 5-year warranty as standard
A ViaLite Extra Wideband link is also available, covering 10 MHz – 4.2 GHz. Contact us for details.
Ultra-wide dynamic range
One of the link’s key features is its ultra-wide dynamic range. This allows wider bandwidths to be transmitted including the entire 700-2450 MHz. For High Throughput Satellites (HTS), typical bandwidths are 500 and 800 MHz.
Other potential applications
Bi-directional point-to-point or point-to-multipoint configurations to transport TETRA, cellular or WiMAX signals to repeaters and base stations. The bandwidth is also designed for use in secure antenna remoting for special forces or government installations.
There is also a ViaLite Wideband (10 MHz-3 GHz) link available.
The Ultra Wideband link is available in several formats:
– Single rack chassis card / Dual rack chassis card (Rx/Rx, Tx/Tx or Tx/Rx)
A fully populated 19” 3U ViaLiteHD rack chassis supports up to 26 links and accepts 13 RF cards, plus a Monitoring & Control Module and dual power supply modules. A 1U chassis accepts three RF cards or two RF cards with a Monitoring & Control Module.
– Blue OEM Link
The ViaLite standalone Blue OEM Link offers a compact, single link solution.
– Yellow OEM Link
The Yellow OEM Link has been designed for system integrators and equipment manufacturers to build the link into their own designs.
– Blue2 Link
The Blue2 Link is a dual-solution OEM which can be setup as 2x transmitters, 2x receivers or a transceiver, as required.
A range of support modules and accessories is also available, including indoor rack chassis units and weatherproof outdoor enclosures.
RF Performance Characteristics
Ultra-wideband link Frequency range 2kHz - 4200MHz Flatness 2kHz – 10MHz ±2.5dB (max)
10MHz – 3GHz ±1.0dB (max)
3.0GHz – 4.2GHz ±1.5dB (max)
VSWR (50 Ohm) 1:1.5 Maximum input power +15dBm (without damage) Gain stability ±0.25 dB over 24 hrs RF link gain (nominal) 0dB a Input IP3 14dBm t a Input P1dB +2dBm t a Noise figure 23dB t a b SFDR 110 dB Hz 2/3 a b t
a @ 0dB optical loss
b Calculated at 1200MHz
Optical Performance Characteristics
|Optical wavelength||1310nm ± 20nm (1550nm/CWDM options)|
|Optical power output||4.5dBm (nominal)|
|Operating temperature||-20 °C to +60 °C e|
|Storage temperature||-40 °C to +70 °C|
e Datasheet parameters based on temperature range -10 °C to +50 °C, refer to user manual for performance parameters at -20 °C to +60 °C.
Popular Configuration Example
Ultra wideband fiber optic link transmitter module with -15dB nominal gain,50 ohm SMA and FC/APC connectors
Transmitter, Ultra Wideband 2 kHz-4.2 GHz, 50 Ohm SMA, Singlemode SC/APC, Rack plug-in module, Wavelength 1310 nm
Receiver, Ultra Wideband 2 kHz-4.2 GHz, 50 Ohm SMA, Singlemode SC/APC, Rack plug-in module
ViaLiteHD Ultra Wideband Link Datasheet (version HRx-Ux-DS-2)
Blue OEM Datasheet (version HRx-xx-xM-DS-4)
Blue2 Link 9-Way Datasheet (version HRx-xx-xQZ-2)
Blue2 Link 15-Way Datasheet (version HRx-xx-xP-W-3)
Yellow OEM Datasheet (version HRx-xx-xN-DS-2)
ViaLiteHD RF Link Handbook (version HRx-HB-9)
Please contact us if you are interested in the Extra Wideband link (10 MHz – 4.2 GHz).